header



Welcome to the Micro Center Tech Support Blog!
Find free technical support on a variety of products featured at Micro Center and plenty of how-tos on new technology. Start searching our Blog below or search our Tech Center archives »

Can't find what your looking for? Take advantage of our Tech Support services »

Join the MC Tech Support Community Forum: Get direct advice from the Knowledge Experts @ Micro Center.
Click here to access the Forum »

Search This Blog

Wednesday, February 9, 2011

Adjusting AA/AF Settings with an nVidia Graphics Card

Anti-aliasing or AA removes parts of the video signal that are at a higher frequency than the monitor is setup to show. It will take areas of the image that would cause artifacts to appear on the screen and slightly blurs them to create a smoother appearance.

Antistropic Filtering or AF enhances the quality of textures on viewed surfaces that are at an oblique angle to the camera. When rendering detail at these angles, Antistropic Filtering reduces blur and preserves detail. These settings can have a substantial impact on what you see on the screen especially in PC Games.

  1. Open the nVidia control panel by right-clicking on the desktop and choosing nVidia Control Panel.


    Note: If this option is not available, visit www.nvidia.com and download the latest drivers for your graphics card.
  2. Ensure that the nVidia Control Panel display mode is on Advanced Settings.


  3. Once set to Advanced Settings, choose Manage 3D Settings on the left, under the 3D Settings category.


  4. On the Manage 3D Settings screen, change the Antistropic Filtering to the desired setting.


  5. Change the Anti-aliasing – Mode to Override Any Application Setting.


  6. Change the Anti-aliasing – Setting to the desired setting.


  7. Click the Apply button at the bottom to save the settings.

Tuesday, February 8, 2011

How to Configure Port Forwarding

Port forwarding can help in getting network-enabled applications, such as online games or chat services that would be otherwise inoperable, up and running. This document contains information specific to Linksys routers but the steps are largely the same. If you have questions that are not answered in this document, we recommend you look in the manual that came with your router.

This article will show you how to set up port forwarding on your router.

Before you begin:

You will need to know the port number required by the application. To get this information, contact the application vendor or look at the documentation included with the program.

You will need to know the IP Address of the computer to forward the port to. To find this, first power on the computer you will use and go to Start » All Programs » Accessories » Command Prompt. When it opens, type in "ipconfig" and use the IP Address or IPv4 Address.

Here's how to set up Port Forwarding:
  1. Click on the Start button and choose All Programs.
  2. Locate and open the Internet Explorer application from the All Programs menu.
  3. In the address bar located at the top of the screen, erase whatever address is in the bar and replace it with "192.168.1.1" without the quotes. Note that some routers use the address "192.168.0.1", so if it does not work right away, try the second option. Consult your router documentation.


  4. When prompted for a username and password, enter "admin" without the quotes for both the username and the password.

    Note that some routers differ in their default username and password, check the manual that came with your router for more information on the default username and password.
  5. Once logged in, choose the Applications & Gaming tab seen highlighted in the figure below.
    Note that some routers may have these settings on the Firewall or Port Forwarding tab.


  6. Enter the name of the application into the Application field. This is the program for which you want to forward the ports.
  7. Enter the Start and End port range for the program. This information should come from the program's documentation.
  8. Choose the protocol that should be used for the application; TCP, UDP, or Both. Most of the time Both is fine. Consult the application documentation for more details.
  9. Enter the IP Address for the PC that is running the application. You can find this information in the Network Settings for your PC.


  10. Place a check in the box to Enable the forwarding. This gives you the ability to set up several applications and turn them on and off without having to reenter the settings all over again.
  11. Click on Save Settings or Apply along the bottom.
That's it! Your ports are now forwarded and you will be able to use the respective applications as normal.

Friday, February 4, 2011

How to Remove McAfee Security from Windows 7

This article details how to remove a McAfee security product from a desktop or laptop running Windows 7. This is useful when installing a new Antivirus program or upgrading the McAfee software.

  1. Click on the Start button in the bottom left corner of the screen.
  2. Click on Control Panel on the right side of the screen.


  3. In the Control Panel, choose Uninstall a Program or Programs and Features.


  4. In the Search box in the top right corner of the window, type “McAfee” without the quotes and wait a moment as it registers the search results.
  5. Once all McAfee products are displayed, right click on the item to be removed and choose Uninstall or, if unavailable, choose Change/Remove.
  6. Choose to remove all security programs and click Next to proceed with uninstall.
  7. Once finished, restart the computer and install the new antivirus program.