header



Welcome to the Micro Center Tech Support Blog!
Find free technical support on a variety of products featured at Micro Center and plenty of how-tos on new technology. Start searching our Blog below or search our Tech Center archives »

Can't find what your looking for? Take advantage of our Tech Support services »

Join the MC Tech Support Community Forum: Get direct advice from the Knowledge Experts @ Micro Center.
Click here to access the Forum »

Search This Blog

Wednesday, October 12, 2011

Changing the Windows Startup Sound Workaround

You want to change the Windows Startup Sound and it cannot be easily done. This describes a workaround.

When you look in Sounds there is only the option to "Play Windows Startup sound" or uncheck it and not play a sound.

Unfortunately, there is not an easy way to do this. The startup sound is part of the imageres.dll file. There are ways described about how to do it on the web by basically hacking the imageres.dll using 3rd party software. However, this method is not supported by Microsoft and could result in a system that will not start Windows. The way described below is a workaround and does not change the Windows Startup sound, it does allow you to customize the sound played when Windows starts.
  1. Right-click on the Windows desktop away from any icons and outside any open windows, and on the Desktop context menu, left click "Personalize".

    Personalize

  2. On the "Change visual and sounds on your computer" windows click the Sounds icon Sounds icon in the lower right of the window.

    Sounds

  3. This will open the Sound window on the Sounds tab. On the "Program Events" menu scroll down and select Windows Logon.

    Browse


  4. Click the "Browse" button and select the file you want to use for the sound to be played when Windows loads. It must be a wave file and you should avoid anything especially long as it could delay the startup.

    select the file


  5. Uncheck the Play Windows Startup sound by clicking on the box.

    Play Windows Startup sound


  6. Click "Apply".
  7. You should also click the "Save as" key and enter a new name for your Sound Scheme and click OK.

    Save As


  8. The sound you selected will be played after the Windows logon as Windows is loading the desktop.
You can also contact Technical Support here.

Tuesday, October 11, 2011

The setup assistant loads after every restart In Mac OS X 10.5

This article will assist in stopping the setup assistance from loading after every restart.

After the initial set up is complete you are asked to follow the setup assistant. This sets up the computer and gets the unit registered in your name. When you restart the system the Setup Assistant starts up again. These steps below will assist in correcting the issue.
  1. Start your Mac with a "SAFE BOOT" by turning on the Mac while holding down the "Shift" key. 
  2. The log in window will appear, click on the restart option. (Click back if the restart option is not displayed) 
  3. Make sure you update your system to Mac OS X 10.5.2 after this.
  4. If the issue still persists: Restart the computer in single user mode, (holding down the "Command and S" key).
  5. Enter the three commands below pressing "Enter" after each command.
    "mount -uw /"
    "rm /var/db/.SoftwareUpdateOptions"
    "reboot"
  6. When the computer has reloaded the desktop please use the Software Update to update to Mac OS X 10.5.2.

You can also contact Technical Support here.

Troubleshooting Sound Issues in Windows 7: Part Three

This is part Three of the series on the subject of troubleshooting sound issues in Windows 7. In this part we will look at the drivers and installation of the sound hardware within the computer.
  1. To begin, click on the Start button in the bottom left.

    Start

  2. On the right side of the new Start Menu window, right-click on Computer and choose Properties.

    Properties

  3. On the new window, click on Device Manager in the top left.
    • After clicking on Device Manager, you may be prompted to allow or grant permission. Choose the option in the affirmative (Yes/Allow) to continue.

    Device Manager
  4. Within this new Device Manager window, locate the section labeled Sound, video and game controllers.

    Sound, video and game controllers

  5. If this section is not listed, check any resource or drivers discs included with your computer for sound/audio drivers. Otherwise, check the manufacturer’s website for a driver download.
  6. IIf it is listed, double-click on Sound, video and game controllers to expand that item.
    • In most cases the sound card will be listed as High Definition Audio Device. If that is not listed it may be under another name.

    High Definition Audio Device

  7. Right-click on the sound card and choose Uninstall.

    Uninstall

  8. When prompted, click OK to uninstall. If prompted to delete the drivers, do not delete the drivers.

    OK to uninstall

  9. Once uninstalled, close any open windows and save all open work, then restart the computer.
  10. After the reboot, ensure that the volume is turned up and then test the sound on the computer. If it still does not function there is typically some form of hardware malfunction, and the computer will need to be serviced.
You can also contact Technical Support here.