Tenda W268R Basic Setup and Configuration

This How-To Guide will walk you through installing your Tenda W268R router for basic internet access.

1. Unplug all network cables from the modem, computer and router (if applicable).
2. Unplug the power from the modem and the power from the router, and shut down the computer.
3. Take one end of the existing Ethernet cable and plug it into the modem in the Internet port, then plug the other end of the same cable into the blue WAN port on the router.
   
   
   
   
4. Take the Ethernet cable that came with the router and plug one end into one of the four yellow numbered ports on the router and plug the other end of the same cable into the computer.
   Though the intent may be to use the router wirelessly a hard wired connection is required for setup.
   
5. Plug the power back into the modem and wait one full minute, then plug the power into the router. Wait one full minute, and then turn the computer back on.
6. Click on the Start button, choose All Programs and click on Internet Explorer.
7. In the address bar at the top of the Internet Explorer window, type “192.168.0.1” (without the quotes) and press the Enter key.
   
   
   
   
8. In the window that appears requesting a username and password enter the username “admin” (without the quotes) and the password “admin” (without the quotes) and click OK.
9. Once the setup wizard is displayed click Next to proceed with setup.
   If the type of internet connection is unknown it can be determined by contacting the internet service provider.
10. Once setup is complete, click on System Tools on the left, choose Reboot, and then click the Reboot The Router button.
    
    
    
    
11. Once the router has been rebooted on the left side of the screen click on WLAN Settings.
12. On the right there will be an option for SSID which will by default be either “Tenda” or “WIRELESS_N.” Clear that text and change the SSID to whatever the desired network name is and click Save Settings.
    
    
    
    The SSID is the name of the wireless network that will be broadcast wirelessly.
    
13. Click on WLAN Settings on the left, then beneath WLAN Settings click on Security Settings.
    
    
    
    
14. Under Security Mode select WPA2 Personal.
15. In the Pass Phrase field enter a password of at least 8 characters that includes at least one letter and one number. Write down this password as it is required to connect to the wireless network.
16. Click Save Settings.
17. In the address bar at the top of the Internet Explorer window type “www.microcenter.com” (without the quotes) to verify internet connectivity.

For more assistance contact Technical Support here.

How to Setup a Home Network

A network can give you the ability to share files between computers, share hardware like printers, share a single Internet connection, or get your game console online without having to swap cables.

The most basic home network involves connecting two computers with an Ethernet cable. Using a router provides convenience, expansion, and easy maintenance should your network grow.

This guide will provide the basics to setting up a home network.

Depending on the type of network you are setting up, the connections the computers and devices make could be wired or wireless. Wireless routers are very convenient because you don't have to worry about running wires through walls or around rooms. Wired routers are usually faster and are not subject to interference from cordless phones or other items that create RF interference. No matter what type of router you have selected, it will require power and when it is powered on, various LEDs let you know devices are connected or the device is working.

Setting Up a Router:

1. Find a convenient location to start the process. It doesn't have to be the permanent location. You may need to move it around to accommodate cables or signal strength.

2. Connect the power and follow the instructions on powering the router.

3. Connect the router to your modem. This is usually a network cable that goes from a port labeled WAN, Internet, or Uplink on the router to a port on the modem.

4. Power cycle the modem (turn it off, then turn it on) to make sure the router recognizes the modem.

5. Connect one computer to the router. You only need to connect one at this point so you can configure the router settings.

6. Open Internet Explorer.

7. In the address bar located at the top of the screen, erase whatever address is in the bar and replace it with "192.168.1.1" without the quotes. Most routers use this address or "192.168.0.1". Consult your router documentation to determine the exact address for yours.

8. Using the username and password supplied in your router documentation, log in to the administration tool.

9. Make changes to the default configuration depending on your particular needs.


Here are some basic things to look for:

1. Connection type. Are you using DSL? Most DSL providers use PPPoE. It requires a Username and password supplied by your ISP. If you are on cable broadband there are generally no settings that need to be changed just leave it on Automatic, or DHCP.

2. If this is a wireless router, change the network name from the default setting. If it's a wired router, change the username and password to something unique to you.

3. Take advantage of any other security options the router may offer. Features like WPA or WiFi Protected Access on a wireless router, Port Filtering, and Firewalls, when enabled can help protect against unauthorized access to your router and your network.

Ok, so now the router is set up and you can get one computer on the Internet, what's next?
Well, one of the main advantages to using a router is it allows you to share resources with all the computers on your network. Getting those resources on the network just requires you to connect the devices to the router either by cable on a wired router or through the WiFi technology of a wireless router.

Some of the devices you can connect are:

• Notebook or Netbook computers
• Printers
• Game consoles

Just make sure the devices you want to connect work the same way as your router whether it's wired or not and consult the manufacturer's information for details specific to that device.