header



Welcome to the Micro Center Tech Support Blog!
Find free technical support on a variety of products featured at Micro Center and plenty of how-tos on new technology. Start searching our Blog below or search our Tech Center archives »

Can't find what your looking for? Take advantage of our Tech Support services »

Join the MC Tech Support Community Forum: Get direct advice from the Knowledge Experts @ Micro Center.
Click here to access the Forum »

Search This Blog

Thursday, April 19, 2012

Tech Tip of the Day: How to set up a WinBook Security DVR to Record on Motion Detection

Description: The WinBook Security DVR can be set to record video only when it detects motion. This guide will walk through how to do that.
  1.  Using the mouse connected to the DVR, right click anywhere on the screen and select Main Menu.

    Main Menu

  2. Click the Record Icon

    Record

  3. Within the Record options, click the Record Conf. button

    Record Conf.

  4. Change the Channel to All

    All

  5. Set the REC. Mode to Schedule

    Schedule

  6. Change the Week to All

    Week

  7. Period 1 by default should be set from 00:00 - 24:00. This is correct. To the right of Period 1, check the box for Detect.

    Detect

  8. This completes the record options. Click OK

    OK

  9. Click the Advanced button

    Advanced

  10. Select the Motion Detect icon

    Motion Detect

  11. Change the Status on CH1 - CH4 to ON to enable motion detection

    enable motion detection

  12. Click OK and exit all menus

    exit

  13. Using the mouse connected to the DVR, right click anywhere on the screen

    right click

  14. Select Record Mode then select Schedule for All to complete setup.

    Record Mode
For more assistance contact Technical Support here.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.